- Home /
- CRC/ADOS Products /
- Corrosion Prevention Compounds /
- PREP IT - SANDING PRIMER 400ML
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electric Stabiliser Systems
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
PREP IT - SANDING PRIMER 400ML
Description
CRC Prep It is a single pack high build easy-sanding metal primer with a grey finish. Formulated with anti-corrosive zinc complexes, it outlasts most high build primers by inhibiting corrosion and forms a quick-drying protective coating with excellent adhesion to bare metal. CRC Prep It is ideal as a general purpose primer and filler coat over bare metal or as an intermediate coat over CRC Zinc It, Prime It, Rust Converter or Etch It or to facilitate high build and prepare surface prior to finish coating. It can be applied directly over CRC polyester automotive fillers.
High build and easy sanding allow for surface preparation to promote a top quality high gloss topcoat finish. Choosing a product of CRC’s Zinc Coating range as topcoat will provide maximum protection and a superior finish. If other colours are required, CRC Prep It is compatible with most standard decorative paint systems for metals.
Features & Benefits:
High Build, Easy Sanding – Ideal as primer coat over bare metal or intermediate coat
Zinc enriched for corrosion protection
Excellent adhesion to bare metal
Heat Resistance – Up to 120ºC
Fast drying – Touch dry in 20 minutes, recoat immediately, full cure in 24 hours
Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up
Grey finish
Does not contain CFCs, methylene chloride
Compatible with most standard decorative paint systems for metals
MPI Approved C23
Uses:
Structural steel or frames – Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs
Industrial – Equipment and machinery, machine housings
Farm equipment – Water tanks, tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor draw bars, metal junction, terminal boxes, pump equipment, corrugated metal buildings
Roading and Construction – Bridges, guard rails, lamp stands, signs
Car or caravan – Inner door panels, tow bars, exhaust tail pipes and wheel protection under hub caps
At home – On iron railings, roofing and spouting, gutters, plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges, fences and gates, wrought iron, air conditioning and refrigeration units