- Home /
- CRC/ADOS Products /
- Corrosion Prevention Compounds /
- CRC SOFT SEAL 400ML
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
CRC SOFT SEAL 400ML
Description
CRC Soft Seal provides a dry transparent, amber waxy film for heavy protection of parts that will not wash or wipe off even in severe conditions. It is a premium heavy-duty, long-term, indoor/outdoor corrosion inhibitor for machined metal surfaces and assemblies subjected to long periods of storage or adverse shipping conditions. It is highly resistant to humidity, salt water and spray, chemicals and corrosive atmospheres.
CRC Soft Seal is suitable for the protection and storage of electrical circuits and components, heat pump exterior units and condensers, metal parts and assemblies, alloy extrusions, dies and moulds, battery terminals and connectors. It protects for up to 2 years when exposed to severe salt spray conditions.
Temperature Range -20°C to +100°C.
Features & Benefits:
Seals out moisture and corrosive contaminants
Forms a dry, transparent, amber film which is highly resistant to humidity, salt water and salt spray
Never becomes brittle and will not crack
Will not attack plastic, rubber, paint or insulation material
Easy re-application over existing film and/or clean surfaces
Easily removes with CRC Brakleen or mineral spirits
Withstands 400 hours of salt spray test
Temperature Range -20°C to +100°C
Uses:
Electrical circuits and components
Heat pump exterior units and condensers
Metal parts and assemblies
Alloy extrusions
Dies and moulds
Battery terminals and connectors