- Home /
- Enerdrive Power Systems /
- eSystem Kits /
- eSYSTEM PRO INSTALLER BOARD WITH SIMARINE
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electric Stabiliser Systems
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
eSYSTEM PRO INSTALLER BOARD WITH SIMARINE
Description
ENERDRIVE eSYSTEM RANGE
eSYS-G
Introducing Enerdrives DIY Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more.
Enerdrive have created many different layouts and dimensional sizes to fit nearly every possible application. Designed for the DIY handyman with basic electrical knowledge through to the professional looking to save installation time. From small kits with AC & DC charging and battery monitoring up to kits with 2000w inverters and individual charge/load monitoring.
These kits are all pre-wired by Enerdrive where possible to keep the kits simple to install. All boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application.
Enerdrive also have you covered from a service and support angle with the DIY Installation kits. Designed, constructed and pre-wired by Enerdrive, we know exactly the layout and wiring of your kit so any fault finding or support can be given quickly and concisely.
eSYS-G
- 790W x 380H x 100Dmm
- Charge via a Vehicle input, Solar or Mains power;
- Vehicle: 12 or 24v input, up to 50A Charging
- Solar (DC2DC): up to 45VOC / 800W
- Mains 240V: 40A Charging
- Simarine Battery Monitor
- Lithium low battery reset button (12V start battery input only)
PROPERTIES | ESYS-G |
---|---|
ePOWER AC 40Amp 230v Charger | ✓ |
ePOWER AC 60Amp 230v Charger | |
ePOWER AC 100Amp 230v Charger | |
ePOWER DC2DC 40+ Charger (Vehicle/Solar) | ✓ |
ePOWER DC2DC 30Amp 24V Charger (Vehicle/Solar) | |
Morningstar Tristar PWM-45A Solar Controller | |
Enerdrive Epower MPPT 40A Solar Controller | |
ePRO Plus 500A Battery Monitor with Remote Display | |
Simarine Pico LCD WIFI Monitoring Screen | ✓ |
Simarine SC303 300A Main Battery Shunt | ✓ |
Simarine SCQ25T Individual Load/Charge Module | ✓ |
Simarine SCQ50 Individual Load/Charge Module | |
Simarine ST107 Tank Monitoring Module | |
Inverter Breaker 200A (Pre Wired Inverter Supply | |
Battery Restart Switch (Lithium Batteries) | ✓ |
24hr Critical Load Distribution Fuse Block | ✓ |
Main Load Distribution Fuse Block | |
ePOWER 2000W AC Transfer Inverter | |
ePOWER 2600W AC Transfer Inverter | |
Dimensions | 790W x 380H x 100Dmm |
(✓) Indicates standard Fitment
(#) Indicates optional fitment