- Home /
- CRC/ADOS Products /
- Cleaners and Degreasers /
- LECTRA CLEAN 400ML
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electric Stabiliser Systems
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
LECTRA CLEAN 400ML
Description
CRC Lectra Clean is a non-flammable heavy-duty evaporating cleaner and degreaser for use on electric motors and other heavy-duty electrical and mechanical equipment. The stabilised fast-acting solvent blend effectively removes wax, grease, oil, dirt, moisture and foreign matter that are common causes of current leakages and electric inefficiencies. It minimises downtime by cleaning low-voltage motors and equipment while in operation.
CRC Lectra Clean as part of a regular maintenance programme promotes increased operating efficiency and longer equipment life by cleaning and removing foreign substances that can cause leakage, excessive resistance and hazardous operation of electrical equipment. CRC Lectra Clean is an ideal cleaner to remove wire pulling compounds, anti-oxidation compounds and semi-conductive particles before splicing and termination of high voltage cables. Test on small area before using. May be harmful to some plastics.
Features & Benefits:
Non-flammable, no flash point
Can be used on energised equipment – Minimises downtime, spray on while in use
Rapid and complete evaporation – Leaves no residue, no rinsing or wiping required
Quickly penetrates into hard-to-reach areas
Ideal for preparing surfaces for further treatment – Prior to anti-corrosive coating, painting, pre-assembly degreaser
Ideal for cleaning water and contaminants from flood damaged equipment
Chemically stable, inert
Non-conductive
Non-corrosive
Contains no lubricants, silicones, oils
May be harmful to some plastics
MPI Approved C12
Uses:
Electric motors
Generator and transformer windings
Marine and industrial engines
Surfaces prior to anti-corrosive coating
Mechanical and electrical parts
Cables and wires
Industrial and laboratory equipment
Antenna insulators
Coils
Fuse holders
Elevators and escalators
Textile machines
High voltage switch gear
Alarms
Blowers
Air conditioners
Bus bars
Circuit breakers
Controls
Pumps
Welders
Compressors
Surfaces prior to anti-corrosion coatings
Fork lifts
Pre-assembly degreaser of all mechanical and electrical components
Ideal degreaser of all equipment in preparation for painting
Ideal for cleaning water and contaminants from flood damaged equipment